홈 < 장비상세보기
 


▶ 전체장비
▶ Campbell scientific
▶ Dranetz-BMI
▶ Audio precision
▶ Fluke
▶ Hioki
▶ Kikusui
▶ California inst.
▶ Yokogawa
▶ Pantos
▶ IWATSU
▶ LINDOS
▶ QUANTUM DATA
▶ Datataker
▶ Hobo
▶ Dynamax
▶ Greenspan
▶ Electro-metrics
▶ Chauvin Arnoux
▶ Kestrel
▶ Surge
▶ GMC
▶ NTI
▶ Astro-med
▶ Fujitsu Denso
▶ Datalogger
▶ Tektronix
▶ NF(NF Corp)
▶ Algodue
▶ Surge protector
▶ AD POWER
▶ Applent Instruments
▶ Makes Instruments

   Hobo

장 비 명

 HOBO 4찬넬 외장 로거

모 델 명

 H08-008-04

제 조 사

 Hobo

   
    장비 사양

 

 


사양:HOBO 4찬넬 외장로거






Accepts external sensors and input cables for:
Temperature
AC Current
4-20 milliamps
0 to 2.5 Volts DCOperating environment: weatherproof case, tested to NEMA 6
Accepts external sensors and input cables for temperature, AC current, 0-2.5 Volt DC and 4-20 mA
Capacity: 32,520 measurements total
User-selectable sampling interval: 0.5 seconds to 9 hours, recording times up to 1 year
Readout and relaunch with optional HOBO Shuttle
Drop-proof to 5'
Programmable start time/date
Operating range: -4°F to +158°F (-20°C to +70°C)
Access port provides easy data offload
Mounting hardware included (4 mounting screws and washers)
Size: 5.50" x 5.38" x 1.25" (140 x 137 x 32mm)
Weight: approx. 7 oz. (200 grams)
Memory modes: stop when full, wrap-around when full
Nonvolatile EEPROM memory retains data even if battery fails
Blinking LED light confirms operation
User-replaceable battery lasts 1 year
Battery level indication at launch
Time accuracy: ±1 minute per week at +68°F (+20°C)
Intrinsically Safe (IS) model available for use in monitoring conditions in hazardous locations where combustible gas or dust may be a concern.***
Compliance certificate available
NIST-traceable temperature accuracy certification available

Wide range of sensors available

There are a wide range of external sensors and input cables available for the HOBO H8 Outdoor/Industrial 4-Channel External logger:

TMCx-HD water/soil temperature sensors with lengths from 6' to 50'
TMC6-HB and TMCx-HA series temperature sensors with lengths from 1' to 50'
TMC6-HC stainless steel temperature probe
Split-core AC current sensors, with ranges from 0-20 A to 0-600 A (these are not weatherproof)
0-2.5 V input cable
4-20 mA input cable
Note: Use of passive external sensors required for IS model use

External input specifications

2.5 mm jack: ground, input, switched 2.5 Volts output; ground connection is the same as PC interface connector ground
Input range: 0 to +2.5 Volts DC
Accuracy: ±10 mV ±1% of reading
Resolution: 10 mV (8-bit)
Output power: ±2.5 Volts DC at 2 mA, active only during measurements

상담문의 담당: 박 만종
연락처:02-6679-1494 , 011-247-1494

"""""Total Customer Satisfaction""""""""