홈 < 장비상세보기
 


▶ 전체장비
▶ Campbell scientific
▶ Dranetz-BMI
▶ Audio precision
▶ Fluke
▶ Hioki
▶ Kikusui
▶ California inst.
▶ Yokogawa
▶ Pantos
▶ IWATSU
▶ LINDOS
▶ QUANTUM DATA
▶ Datataker
▶ Hobo
▶ Dynamax
▶ Greenspan
▶ Electro-metrics
▶ Chauvin Arnoux
▶ Kestrel
▶ Surge
▶ GMC
▶ NTI
▶ Astro-med
▶ Fujitsu Denso
▶ Datalogger
▶ Tektronix
▶ NF(NF Corp)
▶ Algodue
▶ Surge protector
▶ AD POWER
▶ Applent Instruments
▶ Makes Instruments

   Hobo

장 비 명

 HOBO 온습도&2 찬넬 외장센서

모 델 명

 H08-007-02

제 조 사

 Hobo

   
    장비 사양

 

 


사양;옥외형 비방수형 로거
HOBO 온습도&2 찬넬 외장센서





Features and specifications

Measurement specifications
Temperature (internal sensor)

Range: -4°F to +158°F (-20°C to +70°C)
Range for internal sensor when used outside of case:
-40°F to +248°F (-40°C to +120°C)
Accuracy: ±1.27°F (±0.7°C) at +70°F, see plot below
Resolution: 0.7°F (0.4°C) at +70°F
Response time still in air: 15 min. typical with sensor inside case; 1 min. typical with sensor outside case Relative humidity (user-replaceable RH sensor)

Range: 25% to 95% RH at +80°F for intervals of > 10 seconds, non-condensing and non-fogging, see plot below
Accuracy: ±5% (requires BoxCar 3.7.3 or BoxCar Pro 4.3 or higher)
Response time 10 min. typical in air
Sensor operating environment: +41°F to +122°F (+5°C to +50°C) non-condensing and non-fogging

External input accepts the following sensors:

Wide range of temperature sensors (TMCx-Hx series)
Split-core CTs for AC current (5 Models)
4-20 mA input cable (CABLE-4-20mA)
0-2.5 V DC input cable (CABLE-2.5-STEREO)
External 2.5 volt input specifications

2.5 mm jack: external input ground, input, switched 2.5 V output; external input ground connection is not the same as PC interface connection ground and should not be connected to any external ground
Input range: 0 to +2.5 Volts DC
Accuracy: ±10 mV ±1% of reading
Resolution: 10 mV (8-bit)
Out power: +2.5 Volts DC at 2 mA, active only during measurements

상담문의 담당: 박 만종
연락처:02-6679-1494 , 011-247-1494

"""""Total Customer Satisfaction""""""""